www.stancor.com a r e l a y s a n d c o n t a c t o r s d . c . p o w e r c o n t a c t o r s C ty p e coil contact rating-(amps.) d i mens i ons s tancor c oil resistance inductive load inches p art duty terminal pole bracket volt. ( ohms) c ontact volt. normally open normally c losed c ase weight agency sec . number c ycle type* form s tyle d.c . @ 25?c m aterial d. c. c ontinuous inrush ** c ontinuous inrush ** l w h (oz.) certif. a 124-906 continuous 3 spno standard 12 13.2 silver alloy 12 100 400 - - 3.56 3.13 2.19 16.0 - 124-902 continuous 4 spno standard 12 13.2 silver alloy 12 100 400 - - 3.56 3.13 2.19 16.0 - 124-910 continuous 6 spdt standard 12 13.2 silver alloy 12 100 400 50 200 4.69 3.13 2.19 19.0 - b 124-907 continuous 3 spno standard 24 53.0 silver alloy 24 100 400 - - 3.56 3.13 2.19 16.0 - 124-903 continuous 4 spno standard 24 53.0 silver alloy 24 100 400 - - 3.56 3.13 2.19 16.0 - 124-911 continuous 6 spdt standard 24 53.0 silver alloy 24 100 400 50 100 4.69 3.13 2.19 19.0 - c 124-908 continuous 3 spno standard 36 120.0 silver alloy 36 100 400 - - 3.56 3.13 2.19 16.0 - 124-904 continuous 4 spno standard 36 120.0 silver alloy 36 100 400 - - 3.56 3.13 2.19 16.0 - 124-912 continuous 6 spdt standard 36 120.0 silver alloy 36 100 400 50 100 4.69 3.13 2.19 19.0 - d 124-913 continuous 4 spno standard 48 213.0 silver alloy 36 100 400 - - 3.56 3.13 2.19 16.0 - e n g i n e e r i n g d e s i g n d a t a operation in % of n om. breakdown voltages coil rating coil v oltagerating all terminals - 60 hz rms contact material electrical life mechanical life n ominal o pen max. m agnetic m ax. c ontacts o per. o per. o per. d. c. coil rating safe opposite s ame to o per. at per o per. at per temp. type (watts) pick-up operate polarity polarity ground power pilot rated l oad m in. no load m in f 124 12 75% 110% 500 500 500 silver alloy gold 50,000 2 100,000 6 150 for outline drawings refer to page 55. temperature range CC -40?f to 150?f terminations CC contacts: 5/16"-24 unf-2a thread CC coil: #10-32 unf-2a thread recommended mounting CC v ertical plane with coil terminals up. * terminal type: 3 = grounded coil, spno 4 = isolated coil, spno 6 = isolated coil, spdt ** inrush current: current applied within the first 1/2 second of contact closure hardware t orque s pecification CC contact terminal: 60 inch-lbs., max. CC coil terminal: 12-18 inch lbs. CC caution: a back-up wrench must be used to hold the bottom nut stationary type 124 custom design capabilities CC coil voltages 6 vdc through 48 vdc CC high vibration CC gold plated contacts for pilot duty (low load switching) applications CC please complete application data form on page 95 of this section. n ote: c aution m ust be used in coil selection for use in 12 volt systems where battery charging may expose coil to continuous, higher-than-rated voltage. s tancor will not be responsible for consequences of misapplied solenoids.
www.stancor.com r e l a y s a n d c o n t a c t o r s terminal type C coil grounded to case spno terminal type C isolated coil spno terminal type C isolated coil spdt 1.250 3.563 l 3.125 w 2.313 2.188 h 5/16-24unf-2a x .547 (usable) length #10-32 unf-2a x .320 long .281 wide x .500 long slot 1.250 3.563 l 2.188 h 3.125 w 2.313 5/16-24unf-2a x .547 (usable) length #10-32 unf-2a x .320 long .281 wide x .500 long slot 4.688 l 2.344 2.313 3.125 w 2.188 h 5/16-24unf-2a x .547 (usable) length #10-32 unf-2a x .320 long .281 wide x .500 long slot ty p e
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: white-rodgers: ? 124 114211? 124 317111
|
